L-Acoustics LA8, Руководство пользователя

Страница: 19 / 92

LA8_UM_ML_1.1
w w w . l - a c o u s t i c s . c o m
17 en
EN
6.5 On/Off Switch
When the controller is switched on (Figure 8) a 20 second start-up procedure of internal tests is activated, as described
in section 7.4.1. The controller is ready for use when the LCD displays the main screen (see section 7.2).
When the amplified controller is switched Off, the LCD flashes the following message ‘‘POWER OFF’’ for several
seconds until complete shut down.
Notes:
In case of power loss the controller will restart automatically once the power has been restored, and reboot to
the exact same state prior to power loss.
The ‘‘Standby Mode’’ message while the On/Off switch is On (and the four LOAD LEDs lit: see section 7.5.1) indicates
the controller has been put in the Stand-by Mode via the LA NETWORK MANAGER software. This stand-by status
prevents any front panel control and operating unless rebooting the unit by switching it off and on again, which will
effectively cancel the Stand-by Mode and LA NETWORK MANAGER exclusive control.
The On/Off switch does NOT disconnect the amplified controller from mains.
Figure 8: The On/Off switch
On
Off
VOLTAGE