5XT COAXIAL ENCLOSURE
rigging manual
VERSION 1.0
5XT_RM_EN_1.0
w w w . l - a c o u s t i c s . c o m
6
3
SYSTEM SETUP
Dismantling
Apply the associated setup procedure in reversed order.
3.1
Flying
The 5XT has an M6 insert on each side of the cabinet to attach the ETR5.
The ETR5 has three Ø11 mm holes at the top. If needed, use Ø10 mm screws to attach it.
Tools
Electric screwdriver with torque selector.
T30 bit.
Flying
Attach the ETR5 bracket to the 5XT.
Refer to
Attach the ETR5 to the flying structure..
3.2
Pole-mounting
The 5XT has a 3/8" insert on the bottom side of the cabinet to mount the enclosure on a European microphone-stand.
Pole-mounting
Mount the enclosure on the microphone-stand.
If you use a 5/8 inch microphone-stand, use a 3/8" to 5/8" thread
adapter.
