manualshive.com logo in svg
background image

1

* Product you purchased may vary from picture shown

USER MANUAL

F2136

© 2018, Craftsman, 701 E. Joppa Road, Towson, MD 21286

•  Periodically, the surfaces should be cleaned with a mild deter-

gent and water.

•  Auto wax will preserve the unit’s luster finish. Apply the wax fol-

lowing the instructions provided by the wax manufacturer. The 
wax will also help protect the unit against scratches.

•  Grease and oil can be removed with most standard cleaning 

fluids. For safety, use a nonflammable cleaning fluid.

MAINTENANCE

CAPACITIES

• The maximum weight for each shelf should be no more than    

50 lbs., evenly distributed.

• The maximum static load rating, including contents, should be 

no more than 250 lbs.

DIRECT ALL INQUIRIES TO CRAFTSMAN CUSTOMER 
SERVICE AT 888-331-4569. 
Outside the United States call your 
local distributor. Please provide the Model Number when calling.

LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is 
located on a label on the interior right side.

SERVICE PARTS

WARNING: 

To reduce the risk of 

injury, user must read instructions before using 
product.

Содержание 1022358

























Отзывы: