L-Acoustics 108P Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 104

background image

L-ACOUSTICS P Series Manual V2.1

7/12/2007

16

1.6 SB15P DESCRIPTION

The SB15P self-powered subwoofer contains a single 15-inch loudspeaker component that is front-
loaded in an optimally-tuned and vented enclosure. Usable frequency response is 45 to 100 Hz with
less than ± 3 dB variation and the usable -10 dB low frequency response is 40 Hz. Loudspeaker ports
are of large area dimension in order to minimize port non-linearity and turbulence effects.

The fifteen-inch transducer has a 4-inch (100 mm) diameter edgewound copper ribbon voice coil, 18
mm (0.71 in) peak excursion capability, diecast aluminum frame, massive vented magnet structure
and high thermal capacity that provides reduced power compression, long term reliability and low
distortion output.

The SB15P features internal digital signal processing electronics and a mono bridged power amplifier
that  provides  1000  W  continuous  (1  kHz,  0.5%  THD)  into  8  ohms  with  thermal  protection,  short-
circuit/overload  output  protection  and  clip  /  RMS  signal  limiting.  Integral  digital  signal  processing
performs crossover filtering (100 Hz low pass filter) and system equalization for use of the SB15P in
conjunction with the 108P or 112P. Positive or negative polarity operation is selectable via rear-panel
push button switch.

When used with 108P or 112P enclosures in X-OVER mode, the SB15P should be operated with
positive polarity.

When used with 108P or 112P enclosures in FILL, FRONT or MONITOR mode, the SB15P
should be operated with negative polarity.

Connection to the SB15P is made via two parallel XLR connectors and gain is controllable via rear
panel potentiometer. AC power connectors are PowerCon type and 115V or 230V operation is
selectable via rear panel slider switch.

The enclosure is constructed of 18 mm (0.7 in) baltic birch and is internally braced with steel corner
plates  and  sealed,  screwed,  rabbeted  joints  in  order  to  remain  vibration-free  at  extreme  sound
pressure levels. Dimensions are 445 mm (17.5 in) high, 520 mm (20.5 in) wide and 520 mm (20.5 in)
deep  and  the  enclosure  weight  is  36  kg  (79.4  lbs). Finish  is maroon-gray high resilient paint and the
front  of  the  enclosure  is  protected  by  a  black  powder-coated,  1.5  mm  (0.06  in)  thick  steel  grill,
covered with acoustically-transparent grille cloth.

«
...
15
16
17
18
19
...
»

Содержание 108P









































































































Отзывы:

Нет отзывов

Похожие инструкции для 108P

Бренд: Mackie Страницы: 14

Бренд: GE Страницы: 2

Spacemaker 7-5400

Бренд: GE Страницы: 12

Бренд: Olympia Страницы: 5

Бренд: Xilica Audio Design Страницы: 10

Бренд: Eaton Страницы: 131

Бренд: JBL Страницы: 2

Бренд: Fender Страницы: 3

Бренд: Fender Страницы: 56

Бренд: FBII Страницы: 48

Бренд: Harman Страницы: 10

CITATION SURROUND

Бренд: Harman Kardon Страницы: 14

Бренд: Tannoy Страницы: 8

Бренд: Zamel Страницы: 12

Бренд: Zamel Страницы: 12

Бренд: Kitsound Страницы: 8

Feeder/Deliming System EV9797-20

Бренд: Everpure Страницы: 2

Бренд: Linear Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды