23
In-Fit Exercise Pools
Water Care
The Water Care section will help you set
up your ideal filtration and heating set
-
tings. Choose between Away from Home,
Beginner, Energy Savings, Super Energy
and Weekender, depending on your need.
Touch the Water care name to choose your
setting. A green checkmark will appear on
the selected icon to confirm your choice .
In Economy mode, the set point will be reduced by 20°F*, which means that the heating
system will not be engaged unless the temperature falls to 20°F below the spa's set
temperature.
The filtration schedule shown on the screen will apply to the main filtration pump, most
likely pump 1. If your spa uses a circulation pump configured to run 24 hours, the screen
will show you the purge setting instead of filtration. The purges are pre-programmed for a
fixed number of minutes, therefore the duration will be set to N/A on the screen, and only
the start time can be modified.
*Default value, set in pack low-level
Water Care Modes:
Away:
In this mode the spa will always be in economy; the set point
will be reduced by 20º F*
Beginner:
The spa will never be in economy mode and will be filtering
according to the pack’s low level configuration.
Energy Savings:
The spa will be in economy mode during the peak hours of
the day and resume normal mode on the weekend*.
Super Energy Savings:
The spa will always be in economy mode during peak hours,
every day of the week*.
Weekender:
The spa will be in economy mode from Monday to Friday, and
will run normally on the weekend*.
*Filtration will be reduced when the economy
mode is activated.