Note: Before attaching mattress spring
Decide the height position of the mattress support springs.
The highest position is for newborns. As your child grows,
adjust the height of the mattress support springs down so
that he/she cannot pull himself/herself out of the crib.
3 posture board
positions
Attach the four mattress support spring hangers to the hanger brackets mounted on the end
panels using four bolts (B), flat washers (F) and lock nuts (E). Use hex wrench (I) and open
end wrench (H) to tighten.
Mattress support springs (J) must always be attached at the same level on all hangers.
Tip:
Carefully lower the mattress support springs into the crib,
so as not to scratch crib interior.
It is easier to have two people for this step
Once your mattress support spring is assembled, double
check that all bolts on crib are tightened.
Your crib can be used as a toddler or day bed with
additional purchase of rails
L
B
I
F E
Hanger
Step 3
K
H
5 of 5
