background image

 

24

 

L-3 Communications Infrared Products 

 

Warranty 

 
Product(s) will conform to L-3 IP’s current drawings and 
specifications at the time of delivery and be free from defects in 
material and workmanship under normal use and service for twelve 
(12) months, beginning on the date the product is delivered to the 
customer, or beginning on the date product is placed into service; 
collectively whichever is the shorter period of time, but in no event 
shall the period become greater than eighteen months (the 
“warranty”).  L-3 IP’s sole obligation, buyer’s exclusive remedy, 
under the warranty is for L-3 IP, at its option, to repair or replace 
any part of the product which fails to meet the warranty or refund 
buyer’s purchase price, in the form of credit.  For warranty 
repairs/replacements, at L-3 IP’s cost for shipping, buyer shall 
return product(s) to L-3 IP’s facility designated by L-3 IP, with a 
written explanation of failure.  The warranty shall not apply to 
products; (i) used for purposes for which they are not designated or 
intended, or (ii) which have been repaired or altered without L-3 
IP’s prior written consent, or (iii) which have been subjected to 
misuse, negligence, accident or improper maintenance or 
installation, or (iv) upon L-3 IP’s examination, do not disclose to L-
3 IP’s satisfaction nonconformance to the warranty.  In the event 
the product ‘warranty card” is not returned to L-3 IP, proof of 
purchase shall be required to effectuate the warranty provisions 
stated herein above.  

 

 

NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE 
MADE WITH RESPECT TO THE PRODUCT(S) INCLUDING, 
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF 
MERCHANTABILITY, NON-INFRINGENT OR FITNESS FOR 

A PARTICULAR PURPOSE.    

Содержание Thermal-Eye X200xp





























Отзывы: