11
7. How to use
Indicator Instruction that a driver must know
How to use "PT" that pedestrians must know
* When pedestrian enters and escapes out of Danger/Caution Area, for the safety of
pedestrians, the alarm will go off from the point 1m further away that was set originally.
(Example : If the Danger Area / Caution Area is set at 2m / 4m, the warning sound of PT will
go off until it escapes 3m of Danger Area and 5m of Caution Area from VT)
※ Volume Control : Refer to 8P
* When pedestrian enters and escapes out of Danger/Caution Area, for the safety of pedestrians,
the alarm will go off from the point 1m further away that was set originally.
(Example : If the Danger Area / Caution Area is set at 2m / 4m, the warning sound of PT will go
off until it escapes 3m of Danger Area and 5m of Caution Area from VT)
※ Alarm type setting / Volume Control : Refer to 10P
Situation
LED Lamp Status
Alarm
Mute Alarm
When a pedestrian(PT) trespass
on the
Caution Area
Red / Green
Light flashes
gradually
Repeating
"Watch Out"
Press STOP Button 1 Time
Even though alarm ismuted (double
clikc), in case that pedestrian escapes
the set Danger / Caution Area and re-
enters them, the alarm will go off again.
When a pedestrian(PT) trespass
on the
Danger Area
Repeating
"Danger"
Situation
LED Lamp Status
Alarm
Alarm Pause
Mute Alarm
When a pedestrian(PT)
trespass
on the
Caution Area
Green Flash
① "Beep-Beep-" sound
② Vibration
(short interval)
③ Both
※ Depends on menu setting
Press menu or
power button
one time.
Alarm will occur
in 10 seconds
automatically
after pause.
Press menu or power
button twice quickly.
("Beep" alarm will
occur.)
Even though alarm
ismuted (double click),
in case that pedestrian
escapes the set Danger
/ Caution Area and re-
enters them, the alarm
will go off again.
When a pedestrian(PT)
trespass
on the
Danger Area
① "Whee yooo whee
yooo"(siren)
② Vibration
(long interval)
③ Both
※ Depends on menu setting
When the battery is low
(Less than about
4 hours of use)
Red Flash
"Beebeep Beebeep"
5 times every 10
minutes.
-
-
A malfunction
may be caused
by combining
products
backwards.
Charging Port
Caution!
O
Right exemple
Charging Port
X
Wrong exemple
Содержание KIGIS IPAS
Страница 14: ...M E M O ...