Multi-Image Splicing Processor
6
interface, and the current signal source of the three screens will be displayed respectively. To
switch the signal source, rotate the knob to select the screen, and then click the button "S1-S8" on
the front panel to switch
.
FUNC:
function button. Click this button to enter the interface of common functions. Common
functions include: brightness adjustment, color correction, output status, switching effects, effects
time, VGA adjustment, IP Settings, partial display, partial panorama, picture still, full screen still,
serial port Settings, output mapping. These common functions are explained in detail below.
1. Brightness adjustment
The device supports 0-255 order brightness adjustment, and the brightness of all screens can
be adjusted synchronously to meet the requirements of users in different scenarios.
2. Color correction
Can set brightness or contrast color correction value.
3. Output status
Click this option to enter the output status control interface. There are three output status
options: black screen, blue screen and Normal.
4. Switch effects
The device supports two switching modes: direct switching and fade in and out switching,
ensuring no blank screen or blank screen during switching.
5. Special effects time
Adjust the time used for screen or mode switching.
6. VGA regulation
As VGA signal belongs to analog signal, it is easy to produce deviation in common
