![background image](http://html.mh-extra.com/html/kystar/u6/u6_manual_2018069018.webp)
Multi-Image Splicing Processor
11
4. Damage of COM drive of the board or serial port.
If suggestions above fail to solve your problems at last, please contact with our
customer service in time. We will assist you to solve your problems as soon as
possible.
Q6: What are the possible reasons for network overtime with network
splicing processor?
A:
Possible reasons are as follows:
1. IP address of local connection is not in the same field with splicer.
2. Failure of network line or damage of the line.
3. Damage of network port of signal source.
If suggestions above fail to solve your problems at last, please contact with our
customer service in time. We will assist you to solve your problems as soon as
possible.