KYstar KS9000 plicing processing platform
Multi-Screen Splicer Processor
21
3. Mode Save/Call
1. Mode Save
Click “Save Mode” in the main functional area and it will pop up the interface
“Save Mode Setting” as shown in the figure below:
In this interface, you can change the “Mode ID” as needed, i.e. save to which
mode, and also you can change the mode name according to your own demands
(not
including pre-monitoring and hot backup settings).
P: The “Mode 1” data will be enabled by default in time of startup, so it is
recommended that you save the display mode data most commonly used in Mode 1.
