KYstar KS9000 plicing processing platform
Multi-Screen Splicer Processor
11
This software has “Net Connect” and “COM Connect” available; when different
“Connect” modes are selected, different preparations will be necessary.
(1) Select the “NET Connect”.
I. Wiring
Use a CAT5 network cable and connect its two ends to the processor LAN port
and the PC network port respectively (or connect via a switchboard).
II. Change the local access IP
In the operating system of Windows 7, click “Start
→
Control Panel
→
View
Network Tasks
→
Change Adapter Settings” to find out the LAN and you can right
click it to select properties.
Double-click the Internet protocol version 4 (TCP/IPv4) to change
corresponding data.
Note: If the equipment IP is segment 0 by default and the IPs of other equipment
can be ensured within the same field and numbered differently, proper access is
available. If you want to change the IP network segment, you need to change it in the
current software settings.
