KS8000 manual www.kystar.com.cn
8
I. Wiring
Use a CAT5 network cable, with one end connected to the processor's LAN port
and one end connected to the PC's network port (can also be connected through a
switch).
II. Modify the IP of the local connection
Under Windows 7 system, you can find the local connection through Start →
Control Panel → View Network Tasks → Change adapter settings. Right-click the
local connection and select Properties to bring up the dialog box below. Double-click
Internet Protocol Version 4 (TCP / IPv4), and The data is modified as shown below:
Note: The IP address is any value other than the IP of the network segment 0. If you
need to change the IP segment, you need to change it in the software settings.
III.Establish communication
During software communication, select "NET connection" and directly click
"OK". If the connection is successful, a prompt box as shown in the figure below will
pop up, and then click "OK".
（
2
）
COM Connection
I. Wiring
