Kystar K2, Руководство пользователя

Страница: 12 / 34

8
Screen parameters
The screen parameter function module adjusts the load parameters of each of the 4 output ports
on the back of the splicer according to the load of the sending card. The four parameters OUT1,
OUT2, OUT3, OUT4 correspond to the four output ports respectively. For the number of the output
port, see the silk screen on the back of the splicer.
OUT1
水平位置：0
垂直位置：0
水平大小：1920
垂直大小：1080
×1 ×10
×100
点击LOCK调节幅度
OUT2
OUT3
OUT4
Screen layout
The screen layout function module contains four fixed layout templates. The layers opened
through the screen layout are fixed.
Layout one: Turn on a single layer, and one layer fills the entire screen.
Layout two: Turn on two layers. The layout of the layers is shown below. Layout three and
layout four are in analogy.
布局一
布局二
布局三
布局四
画面一
S1