IMPORTANT SAFEGUARDS
When using your Kyowa Flat Iron, basic safety precautions should always be
followed:
Always operate your KYOWA Flat Iron from a power source of the same
voltage and frequency rating as indicated on the rating label.
Do not let the power cord hang over the edge of counter or table.
Do not operate or place any part of your KYOWA Flat Iron on or near any
hot surface such as gas or electric burner, hotplate or heated oven.
Do not operate iron with a damaged cord or if the iron has been dropped
or damaged.
Do not disassemble the iron. Take it to a qualified serviceman for
examination and repair. Incorrect reassembly may cause a risk of electric
shock when the iron is in use.
The iron should always be turned to the lowest setting before plugging
or unplugging from outlet.
Do not allow cord to touch hot surface. Let iron cool down completely
before putting away. Loop cord loosely around iron when storing.
Do not leave iron unattended while connected or in an ironing board.
Burns may occur from touching hot metal parts.
Avoid touching hot surfaces of the iron during use. Use the handle only.
Switch OFF and unplug the iron when not in use.
To reduce the risk of electric shock, do not immerse or expose the Flat
Iron to rain, moisture or any liquid.
Keep out of reach from children or from persons with mental or physical
disabilities.
This KYOWA Flat Iron is intended for normal domestic/household use
only. This model is not suitable for commercial use.
1
CONGRATULATIONS
You are now a proud new owner of a KYOWA Flat Iron model no.
KW-7015.
Before using for the first time, kindly take time to carefully read your
instruction manual. Please observe all safety precautions and follow
operating procedures. After reading, kindly store your instruction
manual in a safe place for your future reference. Should you pass on
this Flat Iron to a third party, please hand over this instruction manual
as well.
PARTS DESCRIPTION
2
