2. Remove all the internal connector.
-+ Remove this portion along with pressing.
3. Do not pull the skin forcefully, but remove slowly from the bottom.
0
Removing only the skin -+ @ Covering with skin
(2)
Replacing sensor of injection location ( dismantle)
* 4 section 3 section, Hochstetter
'
s site sensor
Remove the fastener
pull
off
the tube then the connector in sequence.
* Clark Injection Point Sensor
Remove fasteners at 2 locations
pull off the tube then the connector in sequence
6
Содержание M74
Страница 6: ......
