Kyosho Seabreeze 600, Инструкция по эксплуатации

Страница: 3 / 27

To help you get acquainted with how to use this manual, a sample step is shown below. Take a few minutes to study this
step so that you understand what some of the symbols mean. Below the sample step you will find a symbol guide.
A similar symbol guide will be shown at the bottom of each page of assembly steps.
The parts located in this box are
shown full size. Also shown is the
part name and quantity required for
this step.
Many symbols may be used in
each step. Check the symbol
guide for an explanation of the
symbols used.
All parts except screws, washers
and nuts are identified with a key
number. If a replacement part is
required in the future, find the key
number of the part needed in the
replacement part list on page 26.
Refer to the stock # and Mfg#
when ordering replacement parts.
The bag symbol with the number inside it
shows what bag contains the parts required
for this step. This symbol shows that the parts
are in bag 1.
(Do not actually perform this step)
SYMBOL GUIDE
This symbol means to pay special
attention to the instructions given.
This symbol requires that grease be
applied to the part.
This symbol requires that the procedure
be performed as many times as shown.
This sample shows to perform the
procedure twice.
This symbol requires you to cut off the
excess material.
This symbol means that the parts are
not included and must be purchased
separately.
The number inside this symbol shows
what bag contains the parts for that
step.
This symbol requires that thick
cyanoacrylate glue (CA) be used to
attach the parts. Be very careful with
CA—it will bond almost anything
including your fingers.
This symbol requires that the shaded
area shown be removed from
the part.
This symbol requires that a hole be
drilled to a specific size. This sample
would require a 2mm (1/16" or
5/64") hole.
This symbol requires that the parts
be assembled in a specific order.
This symbol requires that 6-minute
epoxy be used to assemble the
parts. Warning: Read and follow all
instructions included with the epoxy.
Some people have allergic reactions
to epoxy and its fumes.
3