KYORITSU K4105A, Руководство пользователя

Страница: 26 / 36

K4105A side 26
English usermanual
Safety Precautions
The instrument is designed, manufactured,
tested and shipped in prime condition in
accordance with the following standards.

IEC 61010-1 Overvoltage CAT III 300V
Pollution Degree 2

IEC 61010-2-31

IEC 61557-1,5

IEC 60529 (IP54)
This instruction manual contains warnings and
safety rules which must be observed by the
user to ensure safety operation of the instrument and to retain it in safe condition.
Therefore, read through these instructions before using the instrument.
WARNING

Read through and understand instructions contained in this manual before using the
instrument.

Save and keep the manual handy to enable quick reference whenever necessary.

Be sure to use the instrument only in its intended applications and to follow
measurement procedures described in the manual.

Be sure to understand and follow all safety instructions contained in the manual.

Be sure to observe the above rules strictly. Not following the instructions may cause
injury or instrument damage.

The symbol
�
on the instrument means that the user must refer to the manual for
safe operation of the instrument. There are three kinds of the symbol
�
. Read the
instructions following each symbol carefully.
DANGER is reserved for conditions and actions that are likely to cause serious or fatal
injury.
WARNING is reserved for conditions and actions that can cause serious or fatal injury.
CAUTION is reserved for conditions and actions that can cause minor injury or instrument
damage.
DANGER

Make sure that the range selector switch is set to a desired position before making
measurement.

Do not make measurement in the presence of flammable gasses. Otherwise, the
use of the instrument may cause sparkling, which leads to an explosion.

Never attempt to connect the test probe if the instrument or your hand is wet.