Digital Phase Open & Reverse Phase & UnderVoltage Relay (GDR-JD01) User's Manual V1.10
37 / 52
Kyongbo Electronics Co., Ltd.
To view fault record from the above screen, press
,
Key to view the detail
categories such as accumulated number of operation, voltage, phase angle, operating
element, and relay operation time, etc.
Press Display
Key in Fault Screen, then it will exit this menu and convert to the upper
menu.
6.2.6.2
Recorder
▶
2.Clear Fault Category
This category can delete the stored Fault content.
Select 2.Clear Fault in Recorder, then the following screen appears.
－ 〉
C l
e
a
r
F a u
l
t
s
C l
e
a
r
A l
l
F a u
l
t
s
?
N o
In the above screen, "No" flashes, and if you don't want to delete the fault record
stored, press
Key, and if you want to delete the fault record, press
Key to
change “No” to “Yes”, and press ENTER (
) Key.
6.2.7
Test
You can test Front Display(Panel), Connection Output, etc. in Test category.
Select 7. Test in Setting, then the following screen appears.
－ 〉
T e
s
t
1
.
D i
s
p
l
a y
T e
s
t
*
2
.
C o n
t
a c
t
T e
e
t
Press
Key in
Test Screen, then it will exit this menu and convert to the default
screen of Setting.
6.2.7.1
Test
▶
Display Test
This menu is a category that can check the condition of LCD and LED on the
relay front side.
Select 1.Display Test in Test, then the following screen appears.
If you don't want the Display Test in the Display Test Screen, press
Key, then it will
exit this menu and convert to the upper menu.
