KYOKUTOH CVC4, Инструкция по эксплуатации

Страница: 8 / 15

6
2. Assembling to the dresser
Assemble to the dresser using the included screws, placing them in the attachment holes on the
adapter shown in Table above.
If there are already any screws at the assembly positions for the dresser, remove them, and
replace them with the included screws.
There are models for which the screw holes that are to be used for assembly to a dresser will vary
depending on the insertion direction. Confirm the corresponding dresser type thoroughly, and then
attach to the main unit.
3. Attaching the hose and hose band (Common to all models)
For the hose, a standard 1-m hose comes included. Cut it before use if it is too long.
If you use the hose with it bent at an acute angle, it may cause chip clogging or hose damage, so
please use it with an appropriate bend angle (100R or more).
Although flame-retardant materials have been used for the hose, it will not be able to withstand
extreme heat.
Do not use it in an environment where it is conceivable that something could ignite.
※
If you use the hose with a length of more than 1m, the product may not be able to demonstrate its
proper performance due to lowering the suction force.