Kyocera PF-410, Руководство по обслуживанию

Страница: 31 / 55

3HW
1-4-11
Problem Causes/check procedures Corrective measures
(1)
No primary paper feed.
(2)
Skewed paper feed.
(3)
Multiple sheets of paper
are fed at one time.
(4)
Paper jams.
(5)
Abnormal noise is
heard.
Check if the surfaces of the following roller
or pulleys are dirty with paper powder:
drawer forwarding pulley, drawer paper feed
pulley, drawer separation pulley and feed
roller.
Check if the drawer forwarding pulley,
drawer paper feed pulley or drawer separa-
tion pulley is deformed.
Electrical problem with the following electro-
magnetic clutche: drawer paper feed
clutche.
Width guide in a drawer installed incorrectly.
Deformed width guide in a drawer.
Check if the drawer separation pulley is
worn.
Check if the paper is curled.
Check if the paper is excessively curled.
Deformed guides along the paper conveying
path.
Check if the contact between the feed roller
and feed pulley is correct.
Check if the pulleys, roller and gears operate
smoothly.
Check if the following electromagnetic
clutche are installed correctly: drawer paper
feed clutche.
Clean with isopropyl alcohol.
Check visually and replace any deformed
pulleys (see page 1-5-4 and 5).
See pages 1-4-9.
Check the width guide visually and correct
or replace if necessary.
Repair or replace if necessary .
Replace the drawer separation pulley if it is
worn (see page 1-5-4).
Change the paper.
Change the paper.
Repair or replace if necessary.
Check visually and remedy if necessary.
Grease the bearings and gears.
Correct.
1-4-5 Mechanical problems