Kyocera LDM-410, Руководство по эксплуатации для владельца

Страница: 9 / 12

8
ERROR CODE-REASON AND SOLUTION
All information will be showed as code or “Error’, the following are all codes and
corresponding solutions.
Code Cause Corrective measure
204 Calculation error Switch on/off the device several times and
measure again.
220 Battery low Charge the device
255 Received signal is too
weak Improve the reflective surface. (Use target
plate or white paper)
256 Received signal is too
strong Improve the reflective surface. (Use target
plate or white paper)
261 Out of measuring range Measure within the appropriate range.
500 Read error Switch on/off the device several times and
measure again.
“ WARNING To reduce the risk of injury, user must read instruction manual ”