Kyocera LDM-410, Руководство по эксплуатации для владельца

Страница: 7 / 12

6
OPERATION
1. Single Measurement
The device will enter single measurement when it is powered ON, press
measuring button
after aiming at target to get result at bottom of the
screen.
2. Continuous Measurement
Long press measuring button to activate continuous measurement,
aiming at the target and press measuring button to stop, the current data
will be displayed accordingly.
*The continuous measurement will stop automatically after 5 minutes.
3. Wheel Measurement
Press mode switch button to activate wheel measurement. Wheel
measurement icon shows and flashes. Align the reference mark for wheel
measurement (5) with the starting point. Roll the wheel from the starting
point to the end point until the reference mark align with the end point, press
mode switch button
again to stop the measurement, the current data will
be displayed accordingly.
To continue wheel measurement, press mode switch button
again.
To end wheel measurement, press measuring button to change the mode
or long press mode switch button to turn off the device.
Wheel measurement icon