User Guide for the Kyocera K342 Phone
43
8 V
OICE
C
OMMANDS
Voice command feature allows you to use voice
commands to call a contact, dial a phone number,
access menus, or find contact information from
your voice dial list.
Note:
You cannot use voice recognition to end a
call; you must press
when the flip is open.
Setting digit lengths
Allows you to set the number of digits used for a
phone number in your voice dial list.
1.
Select
Menu
→
Settings
→
Voice Features
→
Digit Lengths
.
2.
Highlight an option and press
.
–
North American
allows 7, 10, and 1+10
digits in a phone number.
–
Permit All
allows 4 - 14 digits in a phone
number.
Setting up a voice dial list
To call or find a contact using voice dial you
must add the contact to your voice dial list. The
contact name must not have more than three
words or components in a contact name for voice
dialing recognition.
Adding a contact to your
voice dial list
1.
Select
Menu
→
Contacts
→
Voice Dial List
.
2.
Highlight the contact, the phone responds
with the name you highlighted.
3.
Press
after each contact you want to
include in your voice dial list. A checkmark
tag is placed in the box next to the
contact’s name.
4.
Press
to select
Save
.
Removing a contact from your
voice dial list
1.
Select
Menu
→
Contacts
→
Voice Dial List
.
2.
Highlight the contact, the phone responds
with the name you highlighted.
3.
Press
. The checkmark is removed.
4.
Press
to
save.
Automatically add a new contact to
your voice dial list
You can set the phone to automatically add a
contact to your voice dial list when you first enter
a phone number of a new contact.
1.
Select
Menu
→
Settings
→
Voice Features
→
Automatic Add
.
2.
Highlight
Enabled
and then press
.
82-G1673-1EN.book Page 43 Tuesday, August 22, 2006 1:23 PM