13
IPX Printer Name:
The IPX peer to peer printing software uses the NetWare Print
Server Name to identify the 3000E. The default name is the serial number preceded
by KYO, e.g., KYO_163495. If desired, this name can be changed to a more easily
identifiable name with MAP. To change the name, follow the MAP Configuration
instructions in the NetWare Directory Services Configuration section in this guide (the
settings other than NetWare Print Server Name do not need to be entered).
Peer to Peer Printing Software Installation
The peer to peer printing software should be installed on each Windows PC that will
use peer to peer printing services.
1. Insert the CD included with the EcoLAN 3000E.
2. Click on the Windows Start button and select
Run
.
3. For IPX peer to peer printing, type: D:\IPX-P2P\SETUP.EXE and click
OK
.
For IP peer to peer printing, type: D:\IP-P2P\SETUP.EXE and click
OK
.
Follow the instructions on the screen to complete installation.
Note: The IPX P2P installation program only installs a port monitor in the Windows
System directory and so does not prompt for an installation directory or program
group. IPX P2P may be uninstalled using the IPX-P2P Uninstaller on the CD.
Printer Driver Configuration for Peer to Peer Printing
1. If the Printer Driver is Not Already Installed.
ê
Install the printer driver from the CD which is shipped with the printer.
ê
On the Printer Connection screen select
Local
rather than Network. Depend-
ing upon the version of the installer and whether IP or IPX peer to peer is being
installed, the 3000E may appear in the list of local ports.
ê
If displayed in the list, select the 3000E and complete the driver installation. If
not displayed in the list, select LPT1 and complete installation, then follow the
instructions in section 2 below.
2. If the Printer Driver is Already Installed.
ê
Click on the Windows Start button and select
Settings
, then
Printers
.
ê
Right click on the appropriate printer driver and select
Properties
.
ê
In Windows 95/98 select the
Details
tab and click on the down arrow beside
the
Print to the following port:
field to display the list of available ports. In
NT 4.0 select the
Ports
tab and scroll down the list of ports.
ê
Select the 3000E from the list of ports and click on
OK
. IP printers are
displayed by IP address, IPX printers by NetWare Print Server Name.
Note: If IP printers on a different network segment are not displayed, your
router may not be forwarding SNMP broadcasts. If IPX printers are not
displayed, see
Note: If the 3000E Does Not Appear on the List
on page 8.
Peer to peer printing configuration is complete. Print jobs will now be directed to the
selected 3000E when the current printer driver is used.