Kyocera FS-1040, Руководство по обслуживанию

Страница: 44 / 131

2M2/2M3
1-3-12
(1) Items for various settings
Maintenance
menu
Items Description
Image quality
compensation
MC compensation
Select the main charge voltage of the drum unit, from 0 to 7.
(default: 4)
A higher setting makes it less dense.
A lower setting makes the print output denser.
Altitude Setup
Select the altitude of your location:(default: 0)
0:0 to1500 meters (0 to 4921feet)
1:1500 to 2500 meters(4921 to 8202 feet)
2:2500 to 3500meters (8202 to 11,482.8 feet).
Drum Refresh
Select to clean the drum unit if printout appear blurry or has
spots where information is missing.
Printing position
Adjustment This feature adjusts the starting position (top and left) for print output,from -10 to
+10.Each unit of change moves the position by 0.1mm.
Top Select the top margin start-
ing position for printing from
the cassette and for duplex
printing.
Left Select the left margin starting
position for printing from the
cassette and for duplex print-
ing.
Print Margin
Adjustment This feature adjusts margins for print output,from 0 to 10.0, if margins are not print-
ing correctly.
A higher setting makes the margin wider.
A lower setting makes the margin narrower.
Top Select to adjust the leading
edge margin at the top of the
page.
Left Select to adjust the left mar-
gin.
Right Select to adjust the right
margin.
Bottom Select to adjust the trailing
edge margin at the bottom of
the page.
Factory Default This feature restores the device to the factory default settings.
Restore Default
Press the button to restore default settings,and then click OK.
Bottom
Top
Left
Right
Top:10, Left:0
Top:10, Bottom:0,Left:0,Right:0
Top
Bottom
Right
Left