Kyocera ECOSYS P6230cdn, Руководство по эксплуатации

Страница: 198 / 258

9-10
Troubleshooting > Troubleshooting
Irregular horizontal lines
appear in the image. ― Select the [ Menu ] key > [ Adjust/
Maintenance ] > [ Service ] > [ MC ] and
increase the adjustment value. Increase
the adjustment value 1 level at a time
from the current value. If there is no
improvement after the value is
increased by 1 level, increase by 1 level
again. If there is still no improvement,
return the setting to the original value.
―
The altitude is 1000 m or
higher and irregular
horizontal white lines appear
in the image. ― Select the [ Menu ] key > [ Adjust/
Maintenance ] > [ Service ] > [ Altitude
Adj. ], and set to an elevation one level
higher than the current setting.
―
The altitude is 1000 m or
higher and dots appear in
the image. ― Select the [ Menu ] key > [ Adjust/
Maintenance ] > [ Service ] > [ Altitude
Adj. ], and set to an elevation one level
higher than the current setting.
―
Paper often jams. Is the paper loaded correctly? Load the paper correctly. page 3-2
Is the paper of the supported type? Is it
in good condition? Remove the paper, turn it over, and
reload it. page 3-4
Is the paper curled, folded or wrinkled? Replace the paper with new paper. page 3-4
Are there any loose scraps or jammed
paper in the machine? Remove any jammed paper. page 9-26
2 or more sheets are
overlaps when ejected.
(multi feed) ― Load the paper correctly. page 3-2
Printouts are wrinkled. Is the paper loaded correctly? Load the paper correctly. page 3-2
Is the paper damp? Replace the paper with new paper. page 3-2
Symptom Checkpoints Corrective Actions
Reference
Page