Kyocera ECOSYS FS-6950DN Скачать руководство пользователя страница 97

Страница: 97 / 128

2F7-4

1-6-3

(2) Downloading the firmware from the memory card

The procedure below provides how to download firmware from a memory card.
Note that you can download both the system and engine firmware at a time.

1. Turn printer power off.
2. Remove two screws and then remove the

interface slot cover.

3. Insert the memory card into the printer's

memory card slot.

Figure 1-6-4

4. Turn printer power on.
5. Press Menu key on the printer's operation

panel and carry out the memory card for-
matting procedure (1).

6. When formatting is complete, turn printer

power off.

Figure 1-6-5

7. Remove the formatted memory card from

the memory card slot.

8. Insert the memory card to the PC's slot or to

the adaptor.

9. Copy the firmware file to download to the

root directory of the memory card.

10. Remove the memory card from the PC's slot

or the adaptor.

Figure 1-6-6

ory

card

slot

ory

card

Inter

ace

slot

cover

Screw

Messa

display

(

)

Memory Card >

>Format

>Format ?

Processing

Press

the

key.

Press

the

key.

Press

the

key.

Press

the

key.

Press

the

key.

Press

the

key.

Ready

peration

panel

keys

(

ation

auto

atically

printed.)

ory

card

Adaptor
(Me

ory

card

read

writer)

Содержание ECOSYS FS-6950DN

































































































































Результаты поиска

Содержание ECOSYS FS-6950DN

Отзывы:

Kyocera ECOSYS FS-6950DN, Руководство по обслуживанию, Страница: 97 / 128

Результаты поиска

Содержание ECOSYS FS-6950DN

Отзывы: