Kyocera DuraXT E4277, Руководство пользователя

Страница: 3 / 8

3
Setting up the AT3083A AdvanceCommunicator ™
1. Place the AdvanceCommunicator™ in a convenient
position within easy reach of an AC power outlet.
2. Attach the plug at the end of the coil cord of the handset
into the corresponding RJ45 handset receptacle on the
back of the AdvanceCommunicator™.
3. Plug the power supply into the wall AC power outlet
and the round barrel plug at the end of the cord of the
power supply into the corresponding power receptacle
on the back of the AdvanceCommunicator™
4. At this point the LED will flash RED
Installing the portable into the AdvanceCommunicator ™
1. Remove the rubber protective cover from the connector
receptacle covering the micro USB connector on the left
side of the handset (handset facing you) and align the
micro USB connector at the end on the one cable from
the back of the cradle and insert the connector into the
handset with the cable facing DOWN.
2. Remove the rubber protective cover from the connector
receptacle covering the audio connector on the right
side of the handset (handset facing you) and align the
pin connector at the end of the other cable from the
back of the cradle and insert the connector into the
handset with the cable facing UP.
3. Insert the bottom of the handset behind the ridge on the
cradle and press the top of the handset back into the
Cradle until it snaps into place.
4. Turn the Handset on.
5. To remove the handset from the Cradle, press the
release button on the top of the cradle. The Handset
will snap forward out of the cradle.