Sprint Direct Connect
45
calls are not going through, please check to see whether your contact is using a Sprint
phone.
Make a Group Connect Call From History
1. Press
>
History
.
2. Highlight a group entry and press the DC button.
3. Continue the Group Connect call as described previously.
Make a Group Connect Call Without Saving
1. In standby mode, press
>
Contacts
>
Add New
>
New Group
.
2. Press
START
(left softkey) to add Contacts entries with Direct Connect
–capable
numbers to the group.
When adding a contact for the Group Connect call, make sure you highlight the
entry
‘s Direct Connect–capable number (
DC Only
or
DC
).
3. When you have finished selecting entries, press the DC button.
4. Continue the Group Connect call as described previously.
Join or Rejoin a Group Connect Call
If you are not available at the beginning of a Group Connect call, or if you drop off the call
temporarily, you can rejoin an in-progress Group Connect call.
1. Press
>
History
.
2. Highlight the call and press the DC button.
3. Continue the Group Connect call as described previously.
Tip:
You can also join or rejoin a Group Connect call from your Contacts list if you have
stored the group. See
Create a Group Entry
. Select the group entry and press the DC
button.
Note:
If the Group Connect call has already ended, pressing the DC button initiates a new
Group Connect call.
Note:
If you do not want to participate in a Group Connect call, press
or
IGNORE
(right
softkey).
Set Group Termination Options
1. Press
>
Settings
>
DC Settings
>
Group Call Options
.
2. Highlight an option and press
.