Sprint Direct Connect
46
Press
>
History
.
2. Highlight a TeamDC group and press the DC button.
3. Continue the TeamDC call as any other Direct Connect or Group Connect call.
4. When you are finished, press
to end the call. (When you end a TeamDC call that you
initiated, all other participants are dropped from the call.)
Note:
Group Termination Options
: By default, when the originator of a Group Connect or
TeamDC call ends the call, the system disconnects all other participants as well. When
available, you will be able to select a setting in
Settings
>
DC Settings
>
Group Call
Options
to allow Group Connect and TeamDC calls you initiate to remain active after
you leave the call.
Join or Rejoin a TeamDC Call
If you are not available at the beginning of a call, or if you drop off the call temporarily, you can
rejoin the in-progress TeamDC call.
1. Press
>
History
.
2. Highlight the TeamDC entry and press the DC button.
3. Continue the TeamDC call as described previously.
Tip:
You may also join or rejoin a TeamDC call from your Contacts. Select the TeamDC
group and press the DC button.
Note:
If the TeamDC call has already ended, pressing the DC button initiates a new TeamDC
call.
Remove Yourself from a TeamDC Group
1. In standby mode, press
CONTACTS
(right softkey).
2. Highlight a TeamDC group and press
OPTIONS
(right softkey) >
Remove Me
.
3. Press
REMOVE
(left softkey).
Note:
This action also deletes the TeamDC group you belonged to from your Contacts.
Note:
TeamDC group membership can either be forced or non-forced. With a forced TeamDC
group, an end user on the same account cannot be removed from the group, whereas a
user not on the same account can.
TeamDC Call Information
During a TeamDC call, the following information may appear on your screen:
●
The name of the group.
●
The name or Direct Connect number of the person speaking.