Kyocera Contax SL300RT*, Инструкция по эксплуатации

Страница: 112 / 133

6-4
6
G
Using the SET U
P
Mode Functions
Use this procedure to adjust the brightness of the LCD monitor backlighting.
[BACKLIGHT]
Changing the Monitor Backlighting Brightness
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[BACKLIGHT] and then press
R
.
3
Press
U
or
D
on the 4-way button to select
the [BRIGHT] or [LOW POWER] and then
press the OK button
E
.
BRIGHT: Gives brighter backlighting
LOW POWER: Restricts the backlight brightness to save
power.
4
The selected brightness setting is applied and the screen in
step 2 reappears.
[DATE]
Setting the Camera’s Date and Time
See “Setting the Date and Time” ( p.1-6) in Chapter 1.
[INSERT DATE]
Writing the Date onto Image Files
Use this procedure to specify whether the date is inserted on your
images.
• If images that were shot with [INSERT DATE] set to [WITH DATE]
are then printed with [PRINT] selected for [DATE] in [PRINT
SETTINGS] ( p.5-19), the dates will be printed on top of each
other.
• The date is inserted in the lower-right corner of the image. You cannot
erase an inserted date only.
AF MODE
AF METHOD
BRIGHT CNTRL
BACKLIGHT
DATE
SAF
SPEED
STANDARD
BRIGHT
2003.01.01
INSERT DATE NO DATE
SET UP(1/3)
AF MODE
AF METHOD
BRIGHT CNTRL
BACKLIGHT
DATE
SAF
SPEED
STANDARD
BRIGHT
LOW POWER
INSERT DATE NO DATE
SET UP(1/3)
AF MODE
AF METHOD
BRIGHT CNTRL
BACKLIGHT
DATE
SAF
SPEED
STANDARD
BRIGHT
2003.01.01
INSERT DATE NO DATE
SET UP(1/3)
2003.09.01
Finecam_E.book Page 4 Thursday, August 28, 2003 6:21 PM