1001 SERIES INSTRUCTION MANUAL
No. 205-03-330
106-03-004
©
2019 KYOCERA Corporatio
n
PAGE 4/5
INSTRUCTION MANUAL
HAND CRIMPING TOOL
06 1001 103 For 8283-3513 Contacts AWG#22-26
■Part Names
■Basic specification
Part No.
06 1001 103
Weight
Approx. 420g
Dimensions
220 (W) x 70 (H) x 25 (D) mm
■Crimping conditions
Please make sure that the tensile strength of a contact
crimped by using this tool satisfies the following value.
Position
AWG No. of
applicable wire
Crimp height for
reference (mm)
Tensile
strength,
minimum
value (N)
Core wire Coated wire
A
22
0.69 - 0.74 1.45 - 1.55
4.0
B
24
0.63 - 0.71 1.35 - 1.50
3.0
26
2.0
Strip length
3.0 – 3.8mm
■Applicable contact and wires
For special wires, please consult us separately.
Contact
Wire
Style No. AWG No.
Core wire
[No. of
wires /
dia.(mm)]
External
diameter of
coated wire
(mm)
60 8283
3513
XX 808
UL1061
strand
22
7/0.25
Ø 1.26
24
7/0.20
Ø 1.10
26
7/0.16
Ø 0.98
<Instructions for use>
- When setting a contact into or removing it from the
tool, do not hook the contact on the cable stopper or
the anvil. Or the contact could be deformed.
- When binding wires, loosen the wires so that no
stress could be applied to the contact directly.
- Set a contact in the right orientation.
- The ratchet is equipped so that the handles would not
open until proper pressure is applied.
- In order to release the ratchet as an emergency
measure against erroneous crimping, move the
ratchet release lever in the direction as shown in the
figure below.
<Routine check>
1) After use, lubricate the teeth part with machine oil or
etc.
2) Make sure that the handles open/close smoothly
without any clinging or biting at the anvil or the
ratchet part.
3) If the impressing pressure of the ratchet is
decreased during a long-term usage, adjust the
ratchet. The ratchet unlock position could be
changed by the ratchet adjustment screw and the
fixing nut loosened and turned by using a
“specialized tool”. After adjusted, be sure to tighten
the nut. Before use it in the process, make sure that
the crimping operation is performed properly in a trial.
Ratchet-release lever
