Kyocera Mita Ecosys FS-3800, Руководство по эксплуатации, Страница: 87 / 306

Using the Operator Panel
1-75
Adjusting the Print Density
The print density can be adjusted in five steps: from
01
(light) to
05
(dark).
The factory setting is
03
.
1
Press the
MENU
key.
2
Press the or key repeatedly until
Print Quality >
appears.
3
Press the > key.
4
Press the or key repeatedly until
>Print Density
appears.
5
Press the
ENTER
key. A blinking question mark (
?
) appears.
6
Select the print density from five steps from
01
(light) to
05
(dark)
using the or key.
If you want to abandon the setting procedure, press the
CANCEL
key.
7
Press the
ENTER
key.
8
Press the
MENU
key. The message display returns to
Ready
.
>Print Density
MENU
Print Quality >
?
>Print Density
03
ENTER >Print Density
? 03
ENTER
MENU