Kyocera Mita Ecosys FS-3800, Руководство по эксплуатации, Страница: 266 / 306

Printing through Application Software
3-1
Chapter 3 Printing through Application Software
This section uses a document created using Microsoft Word as an example
of how to print from applications.
The printer driver online help will describe the printer settings in more
detail.
3.1 Setting the Paper Size
If there is paper on the MP tray, the printer always prints from the MP tray
first. To print on the paper in the other paper sources, you must remove
paper from the MP tray.
Or, you can switch the MP tray to normal cassette mode by performing
the following steps in
MP Tray Mode on page 1-88 in the Operation
Guide .
1
Set paper of the size specified for the document in the application
into the printer's paper cassette. (For details on how to set paper
sizes, refer to the
Installation Guide
.)
Be sure that the document is correctly formatted with the paper size
you intended to use. To do this, from the Word task bar, select
File
,
Page Setup
,
Paper Size
and check the paper size.
2
Browse
File
>
Print
. The
Print
dialog box will be displayed.
3
Click on the
Name
drop down list, all the printers installed under
Windows are listed. Click the name of the printer you want to use.
4
Select the range of the pages you want to print in the document,
All
or
Current page only
in
Page range
. To print part of the document,
enter page numbers separated by commas.
5
Specify the number of pages you want to print in the
Number of
copies combo box in Copies .
Note
4
3
5
6
7