KYMCO Xciting 300i, Технические учебные материалы Технические учебные материалы

Страница: 35 / 52

P.34/51
Specification for Keihin EMS Parts
NO. Item Photo Tool
1. 39200-LDF2-8000 (ECU) D
2.
1610K-LDF2-8000
(IDLE AIR BYPASS VALVE /ISC)
D
3 MAP SENSOR D
4 THROTTLE POSITION SENSOR/TPS D
5. FUEL PUMP D,M
6. FUEL INJECTOR D,M
7.
WATER TEMPERATURE
SENSOR/WTS
D,M
8. INDUCTIVE IGNITION COIL D,M
9. OXYGEN SENSOR D,M
10. CRANK POSITION SENSOR/CPS D,M
11.
AIR INJECTION SOLENIO
VALVE/AISV
D,M
12. TILT SWITCH D,M
1. To hear if any noisy
2. FUEL LEVEL F:7
Ω
±3 E:95
Ω
±5
10.17~12.43
Ω
~ 18.8K
Ω
when temperature -20
℃
~ 1.136K
Ω
when temperature 40
℃
~ 0.1553K
Ω
when temperature 100
℃
Primary coil: 3.57 ~ 4.83
Ω
Secondary coil: 10.42 ~ 14.49K
Ω
1. Check the label
2. Check if the connector is loosen
3. Check if the voltage is within 5V±0.1V
4. Check the MAP version
Specification
According to the diagnosis report
IDLE opening: 0.5V±0.1V
WOT opening: > 3.78V
13.332kpaABS(1V) ~ 119.990kpaABS(4.2V)
1. Heater : 6.7
Ω
~9.5
Ω
2. A/F: <14.7 Voltage: >0.8V (Mixture is rich)
A/F: >14.7 Voltage: <0.18V (Mixture is lean)
100 ~ 130
Ω
27.75
Ω
±1.8
Ω
Normal position = 0.4V ~ 1.4V
Fall down = 3.7V ~ 4.4V