KYMCO Sento 50, Руководство пользователя, Страница: 19 / 56

17
Breaking in the new tires
New tires need proper break-in to assure maximum perfor-
mance, just as your scooter's engine does. Wear in the tread
surface by gradually increasing your cornering lean angles
over the first 100 miles (160 km) before attempting maximum
lean angles. Avoid hard acceleration, hard cornering, and hard
braking for the first 100 miles (160 km).
The 200 mile (300 km) service should be performed as
outlined in the maintenance schedule section of this
owner's manual. Pay particular attention to the cautions
and warnings in maintenance schedule section.
Unless you have formal training as a service techni-
cian and have access to KYMCO technical reference
materials, it is strongly suggested that you have the
initial service performed by a KYMCO dealer.
Failure to break in your tires could cause the tires to
slip and could result in you losing control of the scooter.
Use extra care when riding on new tires. Perform proper
break-in of the tires as described in this Owner’s Manual
and avoid hard acceleration, hard cornering, and hard
braking for the first 100 miles (160 km).
OPERATION
Troubleshooting
It can be fustrating if your scooter fails to start or stops running
while your are riding. In the rare instance this happens, take a
few moments to checks some items and you may be back to
riding your scooter soon.
√√√√√ Do you have enough gasoline in the fuel tank?
√√√√√ Did you follow the correct procedure for starting the
engine?
√√√√√ Is the battery voltage low (you may need to kick start
your scooter)?
√√√√√ Is the main fuse in good condition?
NOTE: Use this Owner’s Manual to check components and
adjustments that are within your technical ability. If you
cannot resolve the problem, do not hesitate to contact your
KYMCO dealer for assistance.