(12) HORN/LIGHTS INSPECTION
Turn the ignition switch to the "
" position and push
the
check if it sounds.
Headlight/Taillight Inspection:
Start the engine and turn on the headlight switch to
check if the headlight and taillight are good and check
the light shells for dirt and damage.
Stoplight Inspection:
Apply the front and rear brake levers respectively to
check if the stoplight is good. And also check the stop
light shell for dirt and damage.
Turn Signal Light Inspection:
Operate the turn signal switch to make sure whether
the right/left front and rear turn signal lights can wink
and buzz. Also check the light shells for dirt and damage.
(1)Headlight
(2)Taillight/ Stoplight
(3)Turn signal light
(4)Horn button
ON
horn button to
Replace any dirty or damaged lights with new
ones to avoid danger during riding.
CAUTION:
29
(1)
(2)
(3)
PASSING