KYMCO Mongoose 50-2T, Руководство по обслуживанию

Страница: 71 / 258

4
. LUBRICATION SYSTEM
4-3
SERVICE INFORMATION (90cc/70cc/50cc-4T)
GENERAL INSTRUCTIONS
•
The maintenance of lubrication system can be performed with the engine installed in the frame.
•
Use care when removing and installing the oil pump not to allow dust and foreign matters to
enter the engine and oil line.
•
Do not attempt to disassemble the oil pump. The oil pump must be replaced as a set when it
reaches its service limit.
•
After the oil pump is installed, check each part for oil leaks.
SPECIFICATIONS mm (in)
Item Standard Service Limit
Inner rotor-to-outer rotor clearance 0.15 (0.006) 0.2 (0.008)
Outer rotor-to-pump body clearance 0.15
～
0.2 (0.006
～
0.008) 0.25 (0.01)
Oil
pump
Rotor end-to-pump body clearance 0.04
～
0.09 (0.0016
～
0.0036) 0.12 (0.0048)
TROUBLESHOOTING
Oil level too low Poor lubrication pressure
•
Natural oil consumption
•
Oil level too low
•
Oil leaks
•
Clogged oil filter or oil passages
•
Worn or poorly installed piston rings
•
Not use the specified oil
•
Worn valve guide or seal