KYMCO Like 125, Руководство по обслуживанию, Страница: 138 / 157

15
. ELECTRICAL EQUIPMENT
9
LIKE 50/125
Performance Test
Remove the ignition coil.
Inspect the ignition coil with an ignition coil
tester.
1. Turn the changeover switch to 12V and
connect the ignition coil to the tester.
2. Turn the power switch ON and check the
spark from the watch window.
‧
Good : Normal and continuous spark
‧
Faulty : Weak or intermittent spark
A.C. GENERATOR
Exciter Coil/Pulser Coil Inspection
Remove the met-in box. (
Ö
12)
Disconnect the A.C. generator wire
connector.
Measure the pulser coil resistance between
the blue/yellow wire and ground.
Resistance (20
℃
): 100
～
150
Ω
This test is performed with the stator
installed in the engine.
＊
Follow the ignition coil tester manufac-
turer‘s instructions.
＊
Ignition Coil
The test is performed at both conditions
that the ignition coil is cold and hot.
＊