KYMCO KYMCO Movie S 125i, Руководство по обслуживанию

Страница: 46 / 196

4. LUBRICATION SYSTEM
4-2
ENGINE OIL/OIL FILTER
Remove the oil dipstick and check the oil level
with the oil dipstick.
If the level is near the lower level, fill to the upper
level with the specified engine oil.
OIL LEVEL
Place the motorcycle upright on level ground
for engine oil level check.
Run the engine for 2
～ 3 minutes and check the
oil level after the engine is stopped for 2
～
3
minutes.
Upper lever Lower lever
OIL CHANGE
The engine oil will drain more easily while the
engine is warm.
Remove the oil filter screen cap located on the
bottom of the engine to drain the engine oil
thoroughly.
Oil filter screen cap
After the oil has been completely drained, check
the filter screen O-ring for damage and replace if
necessary.
Install the oil filter screen, spring and filter screen
cap.
Torque: 1.5 kg-m
Fill with the specified SAE15W40#, API: SG/CD
engine oil to the proper level.
Oil Capacity:
At disassembly: 0.9 liter
At change
: 0.8 liter
Check for oil leaks and then start the engine and let
it idle for few minutes.
Recheck the oil level.
Oil ring
Movie S 125i