KYMCO KYMCO Movie S 125i, Руководство по обслуживанию

Страница: 45 / 196

SERVICE INFORMATION
GENERAL INSTRUCTIONS
The maintenance of lubrication system can be performed with the engine installed in the frame.
Use care when removing and installing the oil pump not to allow dust and foreign matters to enter the
engine and oil line.
Do not attempt to disassemble the oil pump. The oil pump must be replaced as a set when it reaches its
service limit.
After the oil pump is installed, check each part for oil leaks.
SPECIFICATIONS
0.12
0.12
0.2 0.05
~
0.10
Standard(mm) Service limit(mm)
Inner rotor-to-outer rotor clearance
Outer rotor-to-pump body clearance
Rotor end-to-pump body clearance
Oil pump
Item
TROUBLESHOOTING
Oil level too low
1. Natural oil consumption
2. Oil leaks
3. Worn or poorly installed piston rings
4. Worn valve guide or seal
Poor lubrication pressure
1. Oil level too low
2. Clogged oil filter or oil passages
3. No use the specified oil
4. LUBRICATION SYSTEM
4-1
Movie S 125i