-21-
4. Meter
1.
MODE button (setup button):
Short press it to switch between the ODO/TRIP state.
Long press it to switch between km/mile.
2.
Core battery/Charging State Indicator: The KEY
ON/START state indicators lights up in yellow to
indicate the scooter power is switched to Core battery.
During charging, the indicator flashes in yellow. After
charging, it flashes in green. If the indicator lights up in
red, charge it.
3.
Reverse Indicator: press the R Gear (continuously
pressed) before the left handlebar switch, and the meter
indicator lights up. The reversing warning sounds are
made and the scooter enters Reverse mode. Use the
Acceleration Handlebar to reverse it.
4.
Blinker:
The indicator is illuminated when the Blinker switch is
activated.
5.
ODO Accumulated distance: This indicates the
accumulated distance in total (km).
TRIP is for calculation of a single-trip distance.
Press the MODE button and it cycles through
ODO→TRIP.
6.
POWER indication:
When START/POWER is pressed, the meter LCD
displays POWER. Press it again and POWER disappears.
: Low-speed warning sound (speed < 20km/hr).
: The battery cover is not closed properly.
