manualshive.com logo in svg

KYMCO EA10UA, Руководство пользователя

Поделиться
Скачать
KYMCO EA10UA Скачать руководство пользователя страница 2

FCC Statement 

This device complies with part 15 of the fccrules. Operations is subject to the following two 
conditions: ( 1 ) this device may not cause harmful interference and ( 2 ) this device must accept any 
interference received, including interfeerence that may cause undesired operation (15.19) 
 
FCC 15.21: 
The changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment.  
 
FCC 15.105 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following 
measures:  
 

 

Содержание EA10UA



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды