KYMCO Dink 50, Руководство по обслуживанию

Страница: 64 / 424

3
. INSPECTION/ADJUSTMENT
3-1
DINK50/125
SERVICE INFORMATION
GENERAL
！
WARNING
•
Before running the engine, make sure that the working area is well-ventilated.
Never run the engine in a closed area. The exhaust contains poisonous carbon
monoxide gas which may cause death to people.
•
Gasoline is extremely flammable and is explosive under some conditions. The
working area must be well-ventilated and do not smoke or allow flames or sparks
near the working area or fuel storage area.
SPECIFICATIONS
Throttle grip free play : 2
～
6 mm (0.08
～
0.24 in)
Spark plug : NGK: DPR7EA9(DINK 125)
；
CR7HSA(DINK 50)
Spark plug gap : 0.9 mm (0.036 in-DINK 125)
；
0.7 mm (0.028 in-DINK 50)
Valve clearance : IN: 0.1 mm (0.004 in) EX: 0.1 mm (0.004 in)~DINK 125
IN: 0.05mm (0.0024 in) EX: 0.05 mm (0.0024 in)~DINK 50
Idle speed
: 1700 rpm~DINK 125
；
1950~2150 rpm~DINK 50
Cylinder compression : 15 kgf/cm
²
(1500 kPa,~DINK 125)
；
14 kgf/cm
²
(1400 kPa,~DINK 50)
Engine oil capacity:
At disassembly : 1.1 L (0.968 lmp qt, 1.166 US qt-DINK 125)
；
0.85 L(DINK 50)
At change : 0.9 L (0.792 lmp qt, 0.954 US qt-DINK 125)
；
0.70 L(DINK 50)
Gear oil capacity :
At disassembly : 0.2 L (0.176 lmp qt, 0.212 US qt-DINK 125)
；
0.12L(DINK 50)
At change : 0.18 L (0.16 lmp qt, 0.190 US qt-DINK 125)
；
0.11L(DINK 50)
Coolant capacity :
Reserve tank capacity: 0.37 liter (0.4 US qt, 0.33 lmp qt –DINK 125 Only )
Radiator capacity : 1 liter (1.1 US qt, 0.88 lmp qt–DINK 125 Only)
Ignition timing
: 10
°±
1.5
°
/1000rpm(DINK 125)
；
28
°±
2
°
/4000rpm(DINK50)
TIRE
1 Rider (60 kg) 2 Riders (110 kg)
Front 1.75 kgf/cm ² (175 kPa, 24.85 psi) 1.75 kgf/cm ² (175 kPa, 24.85 psi)
Rear 2 kgf/cm
²
(200 kPa, 28.4 psi) 2.25 kgf/cm
²
(225 kPa, 31.95 psi)
TIRE SPECIFICATION:
Front : 120/70-13
Rear: 140/70-12(DINK 125)
；
130/70-12(DINK50)
TORQUE VALUES
Front axle nut : 6 kgf-m (60 N-m, 43 lbf-ft)
Rear axle nut : 12 kgf-m (120 N-m, 86 lbf-ft)