KYMCO Bet & Win 125, Руководство пользователя, Страница: 98 / 225

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
8-14
Bet & Win 125/150
Install the movable driven face onto the
driven face.
Apply grease to the guide rollers and guide
roller pins and then install them into the holes
of the driven face.
Install the seal collar.
Remove any excessive grease.
Set the driven pulley assembly, driven face
spring and clutch assembly onto the clutch
spring compressor.
Compress the tool and install the drive plate
nut.
Set the tool in a vise and tighten the drive
plate nut to the specified torque.
Torque : 49.0
_
58.8N-m
Clutch Spring Compressor
Outer Driver, 32x35mm
INSTALLATION
Install the clutch/driven pulley onto the drive
shaft.
•
Be sure to clean the driven face
off any grease.
＊
•
Align the flat surface of the
driven face with the flat on the clutch
drive plate.
＊
•
Keep grease off the drive shaft.
＊
Movable Driven Face
Guide Roller Pin
Seal Collar
Guide Roller
Clutch/Driven Pulley
Driven Face
Clutch Spring Compressor
Lock Nut Wrench
•
Be sure to use a clutch spring
compressor to avoid spring damage.
＊
Special