KYMCO Agility RS 50, Руководство по обслуживанию, Страница: 7 / 26

1
. GENERAL INFORMATION
1-7
AGILITY RS 50
„
After clamping, check each wire to make
sure it is secure.
.
„
Do not squeeze wires against the weld or
its clamp.
„
After clamping, check each harness to
make sure that it is not interfering with any
moving or sliding parts.
„
When fixing the wire harnesses, do not
make it contact the parts which will
generate high heat.
„
Route wire harnesses to avoid sharp edges
or corners. Avoid the projected ends of
bolts and screws.
„
Route wire harnesses passing through the
side of bolts and screws. Avoid the
projected ends of bolts and screws.
No Contact !