11
1)In the standby state, put the food that needs to be kept warm into the ceramic
inner pot, add an appropriate amount of warm water and close the lid tightly.
Press the "Keep Warm/Cancel" button. The "Keep Warm/Cancel" indicator
light changes from flashing to a steady light. At this time, the display shows
"00: 00", and the two dots in the middle are flashing and timing, indicating
that the rice cooker starts to enter the Keep Warm mode.
2)During the working process of any cooking function, press the "Keep
Warm/Cancel" key can cancel.
3)The longest time to keep warm is 8 hours, and it turns to standby mode after 8
hours.
Warm tips: To prevent the food from becoming stale during the Keep Warm
mode, it is recommended that the heat preservation time should not exceed 8
hours.
VI. Cleaning and Maintenance
1.Cleaning method
1)Be sure to unplug and carry out these operations when the appliance is cooled
down.
2)Kitchen detergents must be used.
3)Do not wipe with chemicals, hard brushes, stainless steel wire balls, etc.
4)The ceramic inner pot should be wiped with clean, soft cloth or towel. During
the cleaning process, do not wipe with hard steel wire to avoid damaging the
surface. Except for ceramic inner pot, movable inner cover, and steam hood
assembly, do not immerse the power cord and products into water or flush, to
avoid water inflow of electrical appliances and failure, which may affect safe
use.
5)Do not soak or rinse the outer shell of the rice cooker with water, wipe with a
well-wrung cloth.
6)After each use, remove the movable inner cover and steam hood assembly and
clean them.
7)Clean it in time after use to prevent some dirt from adhering to the surface of
the parts and being difficult to remove.
2.Storage
If the product is not used for a long time, please clean it and
put it into the packing box. It should be stored in a dry place.
3. Troubleshooting
No.
Method
Reason
Failure
①
②
Dirt on the bottom of
ceramic inner pot
No power on
(display not on)
Power plug not
plugged in.
Check whether the power plug is
plugged into place
Rice or porridge
is undercooked
Too little water
Adjust the amount of water added
Clean with a wet towel
The outer lid is not
securely closed.
Close the outer lid securely
Please send it to our local service
outlets for repairs
No.
Method
Reason
Failure
③
④
Dirt on the bottom of
ceramic inner pot
Cook rice/
porridge to
bottom burning
Too little water
Adjust the amount of water added
(according to the water absorption
of the rice, the amount of water
added increases or decreases)
Voltage too high
Use of domestic regulated power
supply
Clean with a wet towel
Please send it to our local service
outlets for repairs
Overflow in
cookingrice,
porridge, or
soup
Too much water and rice
Fill water as required by water level
scale
⑤
Please send it to our local service
outlets for repairs
Functional
failure
Too much water and rice
Fill water as required by water level
scale
⑥
Show E1 or E2
Please send it to our local service
outlets for repairs
Show E3 or E4
⑦
Anhydrous dry fire in
ceramic inner pot
After the ceramic pot is cooled, fill
water and food before stewing
Please send it to our local service
outlets for repairs
4.Do not disassemble or repair this product for non-professional personnel.
5.If the power cord is damaged, it must be replaced with special cord or special
components purchased from our supplier or maintenance department.
6.If the product fails and cannot be remedied, do not repair it by yourself.
Please contact our special repair network or our customer service
department to solve the problem.
7.Ceramics are fragile products and not covered by warranty. Please use them
carefully.
8.This product is for home use only.
12
……
……
……
……
……
