KYLAND KGW3204, Руководство пользователя, Страница: 25 / 44

21
Agent-A Parameters
：
•
Operating mode: RTU Master, ASCII Master
•
Filter Function: enable/disable the Modbus ID filter function
•
Filter Start ID: the range is 1-247
•
Filter End ID: the range is 1-247
B. Agent-B: Modbus TCP Slave - Modbus RTU/ASCII Master
In Agent-B mode, the device ethernetEthernet side is to be Modbus TCP Master mode, and the serial side is
to be Modbus RTU/ASCII Slave mode. The serial mode should be set to RTU Slave or ASCII Slave.
Agent-B Parameters
：
•
Operating mode: RTU Slave, ASCII Slave
•
Slave ID: the ID of Modbus TCP Slave ranging from 1 to 247
•
Ethernet Binding: the E1/2 to communication to corresponding serial port
•
Remote IP: the range of IP for Modbus TCP is 1-247
•
Remote port: the port for Modbus TCP Server
•
Local Port: the port range is 1-65535
•
Protocol: TCP or UDP
•
Slave Device Operation: the gateway device can support up to 16 slave device which could be
pressdpressed
“+” or “-” to add or remove the slave device
In RTU/ASCII Slave mode, you should make sure that the unique of the TCP Slave ID and IP address, the