Cable Connection
12
4.4 10GBase-X SFP+ port
10GBase-X SFP+ slot (10GBase-X SFP+ slot) requires an SFP+ optical module to
enable data transmission. The following table lists the 10GBase-X SFP+ optical modules
(optional) supported by the series switches.
Table 7 SFP+ optical module
Model
Port
MM/SM
Connector
Central
Wavelength
Transmission
Distance
ATR-S0701DT
10GBase-X
SM
LC
1310nm
10km
Note
：
The appearance, wiring and using methods of the 10GBase-X SFP+ port are same as the gigabit
SFP slot, user can refer to 4.2.
4.5 Console Port
There is a Console port on the front panel of the switch, as shown in Figure 12. Connect the
9-pin serial port of a PC to the console port of the switch with a DB9-RJ45 console cable.
You can configure, maintain, and manage the switch by running Hyper Terminal in the
Windows OS of a computer.
Figure 12 Console Port
DB9-RJ45 Console Cable
One end of a DB9-RJ45 console cable is the DB9 connector to be inserted into the 9-pin
serial port of a PC, and the other end is crimped RJ45 connector to be inserted into the
console port of the switch.
